GlossPicks
Menu
  1. GlossPicks
  2. Hair Dryers

Hair Dryer Heat and Speed SettingsHow to Use Them

What hair dryer heat and speed settings do, how to combine them for rough-drying, smoothing and diffusing, and when to press the cool shot button.

Format
Explainer
Reading time
6 minutes
Updated
November 17, 2026
Hair dryer safety plug with test and reset buttons in a wall outlet
Short answer

Use high speed with medium heat to remove most of the water, then drop to lower speed and heat for styling and finish each section with the cool shot. Use low speed and low heat with a diffuser for curls.

Written for: People who own a dryer with several switches and leave it on the highest setting

A typical dryer has two controls: speed (how much air the fan pushes) and heat (how hot the element makes that air). Many also have a cool shot button. Knowing what each one does helps you dry faster with less heat where you do not need it.

Speed: how much air

Speed moves water off the hair and spreads it out so it evaporates. High speed is the quickest way to remove water. Low speed is easier to control and does not blow curls or short layers around.

Heat: how warm the air is

Heat speeds up evaporation and makes hair easier to reshape. More heat is not always better. Dermatologists suggest letting hair air-dry partly where you can and using the lowest heat that gets the job done.

The cool shot

The cool shot switches off the heating element while the fan keeps running. Hair holds the shape it cools in, so a few seconds of cool air at the end of a section helps the shape last. Press it while the brush is still in place, then release.

Settings for each stage

Starting points for dryer settings
StageSpeedHeatAttachment
Rough-dry (remove most water)HighMediumNone or wide nozzle
Smooth with a brushMediumMedium to lowConcentrator
Finish and set each sectionSame as stylingCool shotConcentrator
Curls and wavesLowLow to mediumDiffuser
Fine or short hairLow to mediumLowConcentrator or none
Scalp and roots onlyMediumLow or coolNone

A simple routine

  1. Blot first Squeeze water out with a towel. Less water means less time under the dryer.
  2. Rough-dry High speed, medium heat, no nozzle. Keep the dryer moving and dry until hair is mostly dry.
  3. Section Clip hair into sections. Fit the concentrator.
  4. Style Drop to medium speed and medium or low heat. Aim air from root to end along the brush.
  5. Set Hold the cool shot for a few seconds before you release each section.

Wattage and what it means

Most full-size US dryers are rated around 1,500 to 1,875 watts. Wattage is power drawn from the outlet, not a measure of how good the drying is. Two dryers with the same wattage can feel very different because of fan and nozzle design.

Questions people ask

Is it better to dry on low heat?

Lower heat takes longer. Many people rough-dry with more speed and moderate heat, then lower heat for styling. Hold the dryer a few inches away and keep it moving.

What does the cool shot actually do?

It turns the heat off while the fan runs. Cooling hair while it is on the brush helps it keep that shape.

My dryer shuts off by itself. Why?

Many dryers have a thermal cutoff that stops the heat if the dryer overheats, often because the filter is blocked. Unplug it, let it cool and clean the filter.

Should the settings change with hair type?

Yes. Fine and short hair usually needs less heat and speed. Thick hair benefits from more speed to remove water.

Sources

This guide is research-based: it draws on manuals, published specifications and safety guidance, not on hands-on testing. If we link to a retailer, we may earn a commission at no cost to you. Affiliate disclosure